S4 LED Sexy Styled conversion

Sexy Style in Japan made the original look. Here is my version for those looking for a bit more wild than the Normal running light style S4 tail. ATTENTION! THESE PRODUCTS ARE MADE TO ORDER. Expect a 2-5 week turn around Professional grade circuit boards and components designed to withstand the harsh automotive environment. The circuit boards are made to be an almost plug and play system. It uses the stock bulb sockets so there is no cutting of the harness.  The conversion requires some clearancing and trimming of the back housing to get the circuit boards to fit. I will need your tail lights to do the fitting. The LED’s will be in a dangerous electrical system which can easily kill unprotected lights. All LED’s have voltage regulated circuits with diode reverse voltage protection. Brake light brightness is a vital requirement so they use high quality automotive grade LED’s. They can easily be seen during the day even in the bright Arizona sun. LED CONVERSION: (REQUIRES INSTALL AT AZRX7) Brakes: Center of brake section filled with HIGH Brightness leds Running: Perimeter Halo following outside of all sections(Run/Brake/Turn/Reverse) Turns: Sequential animated bar starting from inner to outer section of tail. Reverse: FULL White high output led panel 2x Optional Load resistors for Turn Signal Hyper flash fix DISCLAIMER: These are not certified by NHTSA and are for off road/Track/Show use only. View this post on Instagram A post shared by AZRX7 (@azrx7)