Information about AQQA High-Quality Wavemaker PumpWavemaker pumps improve the health and beauty of your fish by creating natural water currents. They help circulate water, distribute oxygen, and prevent the accumulation of dirt and debris that can be difficult to clean.Powerful WavesThe pure copper motor generates powerful waves, while the durable, reinforced ABS casing protects your fish from being sucked into the pump. This device simulates the natural currents of rivers or oceans, providing a healthier and more natural habitat for your fish.Strong Magnetic MountThe powerful magnetic suction cup ensures stable and secure adsorption to the aquarium wall. When fully submerged, the pump operates with minimal vibration, making it ultra-quiet. The anti-corrosion ceramic impellers are wear-resistant, making this wavemaker suitable for both freshwater and saltwater aquariums.360° Adjustable FlowEasily adjust the direction of the water flow with a full 360° rotation, ensuring there are no dead spots in your tank. The pump’s small profile means it won’t take up much space and blends seamlessly into your aquarium’s environment.Precautions For UseFor proper use, gently slide the magnet into position on the outside of the glass, aligning it with the pump on the inside. The wavemaker MUST be completely submerged in water to function correctly. If you find the power is very weak, the impeller may be reversed; simply unplug the unit and plug it back in a few times to restore it to normal operation. Some questions and answers about wave pump1. Why dose the wavemaker pump very noisy?Answer: Please pay attention to 3 points about this issue. First, please confirm whether the wave pump is completely immersed in the water. Secondly, please confirm whether the voltage is 110V/60Hz. If it is 50Hz, it will also cause the wave pump to be noisy. Thirdly, please disassemble the pump. Wave pump inspection, whether there is anything stuck near the propeller2. Why does the wavemaker pump not work after a period of time?what should we do？Answer: First of all, we must first rule out whether it is burnt out, if not, please disassemble the pump body, is there something stuck,If the problem cannot be eliminated, please ask for help.METHOD OF APPLICATION:1. Assemble the main pump body with magnetic base.2. Mount the pump in the desired location.3. Plug in any power outlet using 110V/60Hz direct.4. For quiet operation make sure the pump fully submerged.5. Using the articulating ball joint rotate the pump to your desired location.6. The modulator on the air pump can be used to adjust the airflow volume, allowing you to control the amount of air bubbles produced. NOTE:Please pay attention to the way of installation, the magnets cannot be attracted in parallel, because the magnetism is too large, it is easy to cause the glass to burst, and the magnet should be pulled off and slowly attracted. Please follow the instructions carefully. Please be careful hand when installing.
